The Gigabyte Z590 UD ATX motherboard supports 11th and 10th-generation Intel Core series processors. It features a dual-channel non-ECC unbuffered DDR4 (4 DIMMs) and direct 12+1 phase digital VRM solution with 50A DrMOS. Shielded memory routing for better memory overclocking. This motherboard’s advanced VRM heatsink has airflow grooves that increase surface contact. With a fast 2.5GbE LAN with bandwidth management and triple ultra-fast NVMe PCIe 4.0*/3.0 x4 M.2 with the thermal guard, this Gigabyte motherboard is everyone’s favorite.
This gaming motherboard features RGB Fusion 2.0 with a fast USB to USB 3.2 Gen2 and front USB Type-C Type-CS connections, a pre-installed IO shield for easy and quick installation, and a multi-zone addressable LED light show design. It supports addressable LEDs and RGB LED strips, and the Intelligent Fan 6 has multiple temperature sensors. There is a hybrid fan header without a fan stop, Q-Flash plus updated bios with options to install CPU, memory, and graphics card.
FEATURES:Â
Supports 11th and 10th Gen Intel Core Series Processors
Fast 2.5GbE LAN with bandwidth management
Pre-installed IO shield for easy and quick installation
Dual Channel Non-ECC Unbuffered DDR4, 4 DIMMs
Direct 12+1 Phases Digital VRM Solution with 50A DrMOS
Shielded Memory Routing for Better Memory Overclocking
Triple ultra-fast NVMe PCIe 4.0/3.0 x4 M.2 with thermal guard
USB 3.2 Gen2 and front USB Type-C for fast and versatile connectivity
Extended VRM heatsink with airflow grooving for increased surface contact
Q-Flash Plus Update BIOS without Installing the CPU, Memory, and Graphics Card
Smart Fan 6 has a hybrid fan header with multiple temperature sensors, fan stop
RGB FUSION 2.0 with multi-zone addressable LED light show design, supports addressable LEDs and RGB LED strips
TECHNICAL SPECIFICATIONS: Gigabyte Z590 UD ATX Motherboard
 1. 11th Generation Intel Core i9/i7/i5 processors:
Support for DDR4 5333 (OC) / DDR4 5133 (OC) / DDR4 5000 (OC) / 4933 (OC) / 4800 (OC) / 4700 (OC) / 4600 (OC) / 4500 (OC) / 4400 (OC) / 4300 (OC) / 4266 (OC) / 4133 (OC) / 4000 (OC) / 3866 (OC) / 3800 (OC) / 3733 (OC) / 3666 (OC) / 3600 (OC) / 3466 (OC) / 3400 (OC) / 3333 (OC) / 3300 (OC) / 3200 / 3000 / 2933 / 2800 / 2666 / 2400 / 2133 MHz
2. 10th Generation Intel Core i9/i7 processors:
Support for DDR4 2933/2666/2400/2133 MHz memory modules
3. 10th Generation Intel Core i5/i3/Pentium/Celeron processors:
Support for DDR4 2666/2400/2133 MHz memory modules
4. 4 x DDR4 DIMM sockets support up to 128 GB (32 GB single DIMM capacity) system memory
5. Dual channel memory architecture
6. Support for ECC Un-buffered DIMM 1Rx8/2Rx8 memory modules (operate in non-ECC mode)
7. Support for non-ECC Un-buffered DIMM 1Rx8/2Rx8/1Rx16 memory modules
8. Support for Extreme Memory Profile (XMP) memory modules
 Onboard Graphics
 Integrated Graphics Processor-Intel HD Graphics support:
1. 1 x DisplayPort, supports a maximum resolution of 4096×2304@60 Hz
(*Support for DisplayPort version 1.2 and HDCP 2.3), (Graphics specifications may vary depending on CPU support.)
 Audio
 1. Realtek audio CODEC
2. High-Definition Audio
3. 2/4/5.1/7.1-channel
(*To configure 7.1-channel audio, you need to open the audio software and select Device advanced settings > Playback Device to change the default setting first.)
4. Support for S/PDIF Out
 LAN
 Realtek 2.5GbE LAN chip (2.5 Gbit/1 Gbit/100 Mbit)
 Expansion Slots
 1. 1 x PCI Express x16 slot, running at x16 (PCIEX16)
(*For best performance, if installing only one PCI Express graphics card, be sure to install it in the PCIe X16 slot.), (The PCIe X16 slot is compatible with the PCI Express 4.0 standard.)
2. 1 x PCI Express x16 slot, running at x4 (PCIe X4)
3. 2 x PCI Express x1 slots
(The PCIEX4 and PCIEX1 slots conform to PCI Express 3.0 standard.)
(Note: Supported by 11th Generation processors only.)
 Multi-Graphics Technology
 Support for AMD Quad-GPU CrossFire and 2-Way AMD CrossFire technologies
 Storage Interface
 CPU:
1. 1 x M.2 connector (socket 3, M key, type 2260/2280/22110 PCIe 4.0 x4 SSD support) (M2P_CPU)(Note)
Chipset:
1. 1 x M.2 connector (socket 3, M key, type 2260/2280/22110 SATA and PCIe 3.0 x4/x2 SSD support) (M2A_SB)
2. 1 x M.2 connector (Socket 3, M key, type 2260/2280/22110 PCIe 3.0 x4/x2 SSD support) (M2M_SB)
5 x SATA 6Gb/s connectors
Support for RAID 0, RAID 1, RAID 5, and RAID 10
(*See “1-7 Internal Connectors” for installation instructions for M.2 and SATA connectors.)
Intel Optane Memory Ready
(Note: Supported by 11th Generation processors only.)
 USB
 Chipset:
1. 2 x USB 3.2 Gen 2 Type-A ports (red) on the rear panel
2. 6 x USB 3.2 Gen 1 ports (4 ports on the back panel, 2 ports available through the internal USB header)
3. 1 x USB Type-C port with USB 3.2 Gen 1 support, available via an internal USB header
Chipset+2 USB 2.0 Hubs:
1. 6 x USB 2.0/1.1 ports (2 ports on back panel, 4 ports available via internal USB header)
 Internal I/O Connectors
 1. 1 x 24-pin ATX main power connector
2. 1 x 8-pin ATX 12V power connector
3. 1 x 4-pin ATX 12V power connector
4. 1 x CPU fan header
5. 4 x system fan headers
6. 2 x addressable LED strip headers
7. 2 x RGB LED strip headers
8. 1 x Q-Flash Plus button
9. 5 x SATA 6Gb/s connectors
10. 3 x M.2 Socket 3 connectors
11. 1 x front panel header
12. 1 x front panel audio header
13. 1 x S/PDIF Out header
14. 1 x USB 3.2 Gen 1 header
15. 1 x USB Type-C header with USB 3.2 Gen 1 support
16. 2 x USB 2.0/1.1 headers
17. 1 x Trusted Platform Module Header (Only for GC-TPM2.0 SPI/GC-TPM2.0 SPI 2.0 Module)
18. 2 x Thunderbolt add-in card connectors
19. 1 x serial port header
20. 1 x Clear CMOS jumper
(*All fan headers can support AIO_Pump, pumps, and high-performance fans with the ability to deliver up to 2A/12V @ 24W.)
 Back Panel Connectors
 1. 1 x PS/2 keyboard/mouse port
2. 1 x DisplayPort
3. 2 x USB 3.2 Gen 2 Type-A ports (red)
4. 4 x USB 3.2 Gen 1 ports
5. 2 x USB 2.0/1.1 ports
6. 1 x RJ-45 port
7. 3 x audio jacks
 I/O Controller
 iTE I/O Controller Chip
 H/W Monitoring
 1. Voltage detection
2. Temperature detection
3. Fan speed detection
4. Fan fail warning
5. Fan speed control
[*Whether or not the fan (pump) speed control function is supported will depend on the fan (pump) you install.]
 BIOS
 1. 1 x 256 Mbit flash
2. Use of licensed AMI UEFI BIOS
3. PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0
 Unique Features
 1. Support for APP Center
(*Applications available in APP Center may vary by motherboard model. The supported functions of each application may vary depending on the specifications of the motherboard.)
@BIOS
EasyTune
Fast Boot
Game Boost
ON/OFF Charge
RGB Fusion
Smart Backup
System Information Viewer
2. Support for Q-Flash Plus
3. Support for Q-Flash
4. Support for Xpress Install
 Bundled Software
 1. Norton Internet Security (OEM version)
2. Realtek 8125 Gaming LAN Bandwidth Control Utility
 Operating System
 Support for Windows 10 64-bit
 Form Factor
 ATX Form Factor (30.5 cm x 24.4 cm)
 Weight
 1.510 kg
Specification: Gigabyte Z590 UD ATX Motherboard (rev. 1.0)
EAN, GTIN, UPC
889523026595
Brand
GIGABYTE
Product Type
Motherboards
CPU Platform
INTEL
CPU Socket
LGA1200
FORM FACTOR
ATXÂ
MEMORY TYPE
DDR4
Motherboard Chipset
Intel Z590Â
MAXIMUM MEMORY
128 GBÂ
IDEAL FOR GAMING
YES
WARRANTY
3 Years Warranty
COUNTRY OF ORIGIN
CHINA
₹25,200Original price was: ₹25,200.₹18,499Current price is: ₹18,499.
Payment Offer: 2% Instant Discount on UPI and bank Transfer Payments.
 Coupon Code: Use code KRGHOLI to get ₹100 off on orders above ₹1000.
Partial COD: Pay 30% Advance now and Balance on Delivery (COD).
Term & Conditions
KRGKart Pay Later is currently available for order values up to Rs.15000 with Zero Processing Fee, No Documentation, and 3 No Cost EMIs.
*One-time payment gateway fee of 3.25% is applicable.
KRGKart Pay Later payment option will appear on the checkout page on order value up to Rs.15000.
Proceed with the KRGKart Pay Later payment option to check your eligibility. Enter your mobile number linked to your bank account and verify it with the OTP received from BharatX/AuroraX.
Eligible customers are required to pay the first EMI at the time of placing the order, and the remaining 2 EMIs in the next 2 months on the same date of order.
In case of order cancellation, amount paid by the customer will be refunded to the linked bank account within 5 to 7 working days.
Eligibility Criteria for KRGKart Pay Later
1. Link your Primary Account with a good transaction history for optimal credit eligibility. 2. The account holder must be 21 years or above. 3. An account link with a PAN Card is mandatory. 4. Please provide information related to the linked account owner on the KYC steps 5. Users should not have any pending EMIs, otherwise, in some cases, BharatX may not authorize the KRGKart payment later.
*KRGKart Pay Later is powered by BharatX/AuroraX Private Limited. To avail EMI/loan you have to agree to their terms and conditions.
