Lian Li Lancool 215 ARGB White | Mid Tower Gaming Cabinet
(incl. all taxes)
- Mid Tower Cabinet Type
- Up to E-ATX Motherboard Support
- Tempered Glass Panel on both side
- Up to 370mm GPU Clearance Length
- Up to 360mm Radiator Support
7 Days Return
HIGHLIGHTS: Lian Li Lancool 215 ARGB White
Case Type – Mid Tower
Motherboard Compatibility – E-ATX/ATX/M-ATX/ITX
Case Material – Steel + 4mm Tempered Glass
CPU Cooler Clearance – Up to 166mm
GPU Clearance – Up to 370mm
ABOUT Lian Li Lancool 215 ARGB White
The Lian Li Lancool 215 ARGB White cabinet has two pre-installed 200MM ARGB fans and a 120MM fan, combined with mesh panels, the beehive vents enable efficient ventilation. The front mesh panel creates great airflow without dust. Include upper and lower beehive filtered vents, wide fan/radiator adjustment support, and multiple wiring management solutions to suit DIY users’ configurations.
There are two 200MM fans mounted in this Lian Li cabinet, you still have enough space to mount a 360 AIO radiator to benefit from the ultimate cooling situation. These two 200MM fans are equipped with ARGB LED lights, creating a fantastic effect through mesh panels.
The rubber grommet around the motherboard and the wire tie point on the back of the motherboard tray, with the included velcro straps, make the cable easy to operate. The trendy mesh design on the front panel provides filtration of dust from outside the chassis. In addition, the magnetic dust filter at the top and the removable full-length dust tray at the bottom protects the interior components from dust accumulation without obstructing airflow.
OPTIMIZED THERMAL MANAGEMENT
Network admissions spreading over the front board ensure adequate wind stream all through the framework.
Included Fans – Pre-introduced fans guarantee the case runs at maximized execution.
Honeycomb vents – The honeycomb vent plan at the top, back, or more of the PSU chamber ensures a bountiful wind stream is conveyed to the inside parts, improving the warm administration.
Ultimate cooling system scenario – With two 200MM fans mounted beyond the casing, you actually have sufficient space to front mount a 360 AIO radiator to profit from a definitive cooling situation. Try not to stress over the fan screws, they will not impede the radiator.
STUNNING PC ILLUMINATION
Move air beautifully with ARGB impacts – Two 200MM fans are furnished with LED lights which make a stunning impact through the cross-section board.
Highlighted logo – The LIAN LI logo shines in a state of harmony with the fans.
Experience ARGB control through one button – The LED button situated on the top controls 8 lighting modes and 7 tones through a basic snap.
ARGB synchronization with the motherboard – Squeezing the LED button for 3 seconds ignores the control of the LED lights to the motherboard, and press the button for 3 seconds again to recover control of the lights.
Pre-installed fan hub – The included fan center can give additional capacity to 3 extra fans and an additional 1 ARGB gadget.
Plenty of space for cable management – The 22MM thick space behind the motherboard guarantees the links fit in well.
Keep the cable nice and neat – The elastic grommets around the motherboard and the link tie focus at the rear of the motherboard plate, with included Velcro lashes, improve the cable of the board.
E-ATX Motherboard Compatible – Fits motherboards with the greatest width of 280MM.
Removable/adjustable cage supports – 2 x 3.5″ HDD or 1 x 3.5″ HDD + 1 x 2.5″ SSD
Simple dust management – The stylish lattice plan at the front board gives filtration to clean coming from outside the suspension. In addition, the attractive residue channel on the top and the removable full-length dust plate at the base shield the interior parts from dust amassing without blocking the wind stream.
|Motherboard||E-ATX (width – under 280mm)/ATX/M-ATX/ITX|
|Materials||Steel + 4mm Tempered Glass (Both Sides)|
|Fan Support||Top – 2 x 120mm or 2 x 140mm, Front – 2 x 140mm or 3 x 120mm, Top of PSU Chamber – 2 x 120mm|
|Radiator||Top – 1 x 240 / 280 mm, Front – 1 x 280 / 360mm|
|Drive||Behind Motherboard Tray – 2 x 2.5 inch SSD, Hard Drive Cage – 2 x 3.5 inch HDD or 1 x 2.5 inch SSD|
|I/O Ports||Reset button, Power button, LED Button for Lighting Mode Control, 1 x HD Audio, 2 x USB 3.0|
|VGA Clearance Length||370mm|
|CPU Cooler Clearance Length||166mm|
|PSU Clearance Length||210mm|
|Dust Filters||1 x Top (Magnetic), 1 x Bottom (Tray)|
|Included Fans||1 X 120mm 3-PIN 1100 RPM Fans (Rear), 2 x 200mm 3-PIN 800 RPM ARGB Fans (Front)|
|Dimensions (D x W x H)||462 mm x 215 mm x 482 mm|
Specification: Lian Li Lancool 215 ARGB White | Mid Tower Gaming Cabinet