Lian Li Lancool II Mesh RGB + Type-C Mid Tower Gaming Cabinet | White Edition
(incl. all taxes)
- Mid Tower Case Type
- 3 x 1200 mm ARGB Fans
- E-ATX/ATX/M-ATX/ITX Motherboard Compatibility
- 4 mm Tempered Glass (Both Sides)
- 384 mm GPU Clearance Length
7 Days Return
HIGHLIGHTS: Lian Li Lancool II Mesh RGB White Cabinet
Model – Lancool II MESH ARGB + Type-C
Cabinet Size – Mid Tower
Motherboard Compatibility – E-ATX/ATX/M-ATX/ITX
Case Material – Steel body + 4mm Tempered Glass
Pre-Installed Fans – 3 x 120mm (Front)
ABOUT Lian Li Lancool II Mesh RGB White Cabinet
The LANCOOL II MESH RGB features a mesh front panel and mesh bottom left shroud panel, honeycomb vent design, and built-in RGB fans ensuring plenty of airflow to your high-performance components while decorating the system with RGB touches.
With a mesh front, the LANCOOL II creates great airflow in the MESH chassis, packs three ARGB 120mm fans to effectively cool the components in the user’s PC build, and is controllable by buttons on the I/O ports Is. 9 drive mounting space and supports 384 mm maximum GPU length and 176 mm maximum height clearance. Solution for cable management with double tempered glass to view the interior.
BORN TO PUSH THE LIMITS – LANCOOL II MESH RGB highlights a cross-section front board and lattice base left cover panel, honeycomb vent plan, and underlying RGB fans, ensuring a plentiful wind stream conveyed to your elite exhibition parts while decorating the framework with an RGB contact.
MORE ADVANCED COOLING SUPPORT – The improved wind current is a consequence of the joint effort between the pristine cross-section plan, extra exhaust vent openings, and three superior execution RGB cooling fans.
HIGH-PERFORMANCE BUILT-IN ARGB FANs – 3 x 120mm ARGB consumption fans pre-introduced at the front produce more than adequate wind stream while as yet offering plentiful RGB to spice up your PC construct.
ULTIMATE COOLING SUPPORT – Add the BORA DIGITAL ARGB FANs to have more dynamic RGB and expanded cooling effectiveness for your LANCOOL II MESH assemble!
EXPERIENCE ARGB CONTROL ON A WHOLE NEW LEVEL – The lighting impacts of the 3 included RGB fans can be completely controlled through the C button and M button situated on the top front. Exchanging between 8 lighting modes has never been this simple.
By stopping the fan center point’s ARGB header into the motherboard’s 3-PIN 5V addressable RGB headers, you’ll have the option to synchronize the lighting impacts with the motherboard programming by changing the M button to the eighth mode.
If your motherboard doesn’t have any 5V addressable RGB headers, try to interface the SATA link associating the center point to the power supply, and utilize the C and M buttons to control the lighting impacts.
MODULAR PSU SHROUD COVER – The space between the top and base chamber currently includes two removable PSU cover covers for either 2 x 2.5-inch SSDs or can be taken out to fit 2 x 120mm fans. Contrasted with the previous coordinated plan, the particular PSU cover covers permit clients to eliminate them for an unhindered wind stream between the top and base chamber. At the point when 2 fans are mounted, and the cover plates eliminated, ventilation productivity is far and away superior. In any event, when 2 x SSDs are mounted, the vents on the PSU cover covers ensure great ventilation.
MULTI-WAY FAN/RADIATOR BRACKET – The multi-way section upsets your idea of a fan/radiator establishment by offering 4 establishment choices to best meet your requirements.
HOW TO INSTALL THE MULTI-WAY FAN/RAD BRACKET – The multi-way section upsets your idea of a fan/radiator establishment by offering 4 establishment choices to best accommodate your need.
Try not to introduce a 140/280MM radiator on the internal side of the section any other way unsalvageable distortion could happen. The right method for introduction is to mount fans first and then put a radiator on top of the fans.
OPTIMIZED STORAGE CONFIGURATION – With the secluded drive confine, side-mounted SSD bayous, and extra SSD space on the particular PSU cover, the LANCOOL II MESH is equipped for holding up to 9 drives.
REMOVABLE TWO-WAY CABLE MANAGEMENT BAR – Flippable, adaptable, multi-useful
FLIP PANELS AND SHROUDs ALL AROUND – The treated glass sideboards offer an unhindered view of the inside design while the base cover boards give fast admittance to PSU/drive establishment.
CABLE MANAGEMENT WITH EASE – The cover plates save clients’ necks and fingers by disguising virtually every one of the delinquent links
MESH PANEL KIT – Mesh front board is accessible for those LANCOOL II clients hankering to overhaul their framework by trading to a cross-section front board.
|Model||Lancool II MESH ARGB + Type-C|
|Motherboard||E-ATX (width – under 280mm)/ATX/M-ATX/ITX|
|Materials||Steel + 4mm Tempered Glass (Both Sides)|
|Front (Multi-way Fan/Radiator Bracket)||3 x 120 mm or 2 x 140 mm|
|Top||2 x 120/140mm|
|Rear||1 x 120 mm|
|Above PSU Chamber||2 x 120 mm|
|Front (Multi-way Fan/Radiator Bracket)||1 x 360/280/240 mm|
|Top||1 x 240 mm (Aligned to the Left)|
|Behind Motherboard Tray||2 x 2.5 inch SSD|
|Behind The Right Flip Panel||2 x 2.5 inch SSD|
|Hard Drive Cage||3 x 3.5 inch HDD/2.5 inch SSD|
|Above PSU Chamber||2 x 2.5 inch SSD|
|I/O Ports|| – C button for Color Control
– M button for Lighting Mode Control
– 1 x TRRS Audio
– 2 x USB 3.0
– 1 x USB 3.1 Type-C
|VGA Clearance Length||384 mm|
|CPU Cooler Clearance Length||176 mm|
|PSU Clearance Length||210 mm|
|Dust Filters|| 1 x Top (Magnetic)
1 x Bottom (Tray)
|Included Fans|| 3 x 120mm 3-PIN 1300 RPM ARGB Fans in Front
*[Rated Speed – 1300RPM ±10 %Air Flow – 49.14CFM, Noise – 25.0dB(A)]
|Dimensions (D x W x H)||478 x 229 x 494 (mm) / 47.8 x 22.9 x 49.4 (cm)|
Specification: Lian Li Lancool II Mesh RGB + Type-C Mid Tower Gaming Cabinet | White Edition