A GA-Z170-D3H motherboard is a great option for those looking for a powerful motherboard that can handle all of their needs. It is designed with 4x DIMM slots that can be expanded to 64GB of DDR4 2400MHz RAM.
These motherboard series support the brand new sixth Generation Intel Core processors, a 14nm desktop CPU which points to increased performance, energy effectiveness, and support for DDR4 memory, bringing slicing facet aspects and final overall performance to your subsequent PC build.
GIGABYTE Motherboards allow Overclockers to have the capacity to alternate their BCLK Frequency to a favored price of their choice. With the new linear vary adjustment alternative of the Tuning IC, tiers from 90MHz to 500MHz are now possible, so that overclockers are no longer restrained to the 5% levels of regular straps.
GIGABYTE Cloud Station is composed of a number of GIGABYTE special apps that enable your phones/tablet units to communicate, share resources, and manage your computer PC by means of a Wi-Fi connection.
Multi-graphics configuration gives higher photos overall performance for gaming fans who demand the best possible frame rate except compromising on resolution.
1. Support for 7th/6th Generation Intel Core i7 processors/Intel Core i5 processors/ Intel Core i3 processors/Intel Pentium processors/ Intel Celeron processors in the LGA1151 package
For the 7th Generation, Intel Core processors support needs to update the latest BIOS.
2. L3 cache varies with CPU
Chipset
Intel Z170 Express Chipset
Form Factor
ATX Form Factor; 30.5cm x 21.4cm
Memory
1. 4 x DDR4 DIMM sockets supporting up to 64 GB of system memory
* Due to a Windows 32-bit operating system limitation, when more than 4 GB of physical memory is installed, the actual memory size displayed will be less than the size of the physical memory installed.
2. Dual channel memory architecture
3.Support for DDR4 3466(O.C.) /3400(O.C.) /3333(O.C.) /3300(O.C.) /3200(O.C.) /3000(O.C.) /2800(O.C.) /2666(O.C.) /2400(O.C.) /2133 MHz memory modules
4. Support for ECC UDIMM 1Rx8/2Rx8 memory modules (operate in non-ECC mode)
5. Support for non-ECC UDIMM 1Rx8/2Rx8/1Rx16 memory modules
6. Support for Extreme Memory Profile (XMP) memory modules
Onboard Graphics
1. 1 x D-Sub port, supporting a maximum resolution of 1920×1200@60 Hz
2. 1 x DVI-D port, supporting a maximum resolution of 1920×1200@60 Hz
* The DVI-D port does not support a D-Sub connection by adapter.
3. 1 x HDMI port, supporting a maximum resolution of 4096×2160@24 Hz
* Support for HDMI 1.4 version.
4. Support for up to 3 displays at the same time
5. Maximum shared memory of 1024 MB
Audio
1. Realtek ALC1150 codec
2. High Definition Audio
3. 2/4/5.1/7.1-channel
4. Support for S/PDIF Out
LAN
Intel GbE LAN chip (10/100/1000 Mbit)
Expansion Slots
1. 1 x PCI Express x16 slot, running at x16 (PCIEX16)
* For optimum performance, if only one PCI Express graphics card is to be installed, be sure to install it in the PCIEX16 slot.
2. 1 x PCI Express x16 slot, running at x4 (PCIEX4)
3. 2 x PCI Express x1 slots
(All of the PCI Express slots conform to PCI Express 3.0 standard.)
4. 3 x PCI slots
Multi-Graphics Technology
Support for 2-Way AMD CrossFire technology
Storage Interface
1. 1 x M.2 Socket 3 connector (Socket 3, M key, type 2242/2260/2280 SATA & PCIe x4/x2/x1 SSD support)
2. 3 x SATA Express connectors
3. 6 x SATA 6Gb/s connectors
4. Support for RAID 0, RAID 1, RAID 5, and RAID 10
* Refer to “1-7 Internal Connectors,” for the supported configurations with the M.2, SATA Express, and SATA connectors.
USB
1. 8 x USB 3.0/2.0 ports (4 ports on the back panel, 4 ports available through the internal USB headers)
2. 4 x USB 2.0/1.1 ports (2 ports on the back panel, 2 ports available through the internal USB headers)
3. 1 x USB Type-C™ port on the back panel, with USB 3.0 support
Chipset+GENESYS LOGIC USB 2.0 Hub:
1. 2 x USB 2.0/1.1 ports available through the internal USB header
Internal I/O Connectors
1. 1 x 24-pin ATX main power connector
2. 1 x 8-pin ATX 12V power connector
3. 1 x M.2 Socket 3 connector
4. 3 x SATA Express connectors
5. 6 x SATA 6Gb/s connectors
6. 1 x CPU fan header
7. 1 x water cooling fan header (CPU_OPT)
8. 3 x system fan headers
9. 1 x front panel header
10. 1 x front panel audio header
11. 1 x S/PDIF Out header
12. 2 x USB 3.0/2.0 headers
13. 2 x USB 2.0/1.1 headers
14. 1 x Trusted Platform Module (TPM) header
15. 1 x Thunderbolt™ add-in card connector
16. 1 x serial port header
17. 1 x Clear CMOS jumper
Back Panel Connectors
1. 1 x PS/2 keyboard/mouse port
2. 1 x D-Sub port
3. 1 x DVI-D port
4. 1 x HDMI port
5. 1 x USB Type-C™ port, with USB 3.0 support
6. 4 x USB 3.0/2.0 ports
7. 2 x USB 2.0/1.1 ports
8. 1 x RJ-45 port
9. 6 x audio jacks (Center/Subwoofer Speaker Out, Rear Speaker Out, Side Speaker Out, Line In, Line Out, Mic In)
I/O Controller
iTE I/O Controller Chip
H/W Monitoring
1. System voltage detection
2. CPU/System temperature detection
3. CPU/CPU OPT/System fan speed detection
4. CPU/System overheating warning
5. CPU/CPU OPT/System fan fail warning
6. CPU/CPU OPT/System fan speed control
* Whether the fan speed control function is supported will depend on the cooler you install.
BIOS
1. 2 x 64 Mbit flash
2. Use of licensed AMI UEFI BIOS
3. Support for DualBIOS™
4. PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0
Unique Features
1. Support for APP Center
* Available applications in APP Center may vary by motherboard model. Supported functions of each application may also vary depending on motherboard specifications.
3D OSD
@BIOS,Ambient LED,AutoGreen,Cloud Station,EasyTune,Easy RAID,Fast Boot,Smart TimeLock,Smart Keyboard,Smart Backup,System Information Viewer,USB Blocker
2. Support for Q-Flash
3. Support for Smart Switch
4. Support for Xpress Install
1. Windows 10 64-bit (for 7th Generation Intel Processors)
2. Windows 10 64-bit / Windows 8.1 64-bit / Windows 7 32-bit / 64-bits (for 6th Generation Intel Processors)
* Please download the “Windows USB Installation Tool” from GIGABYTE’s website and install it before installing Windows 7.
Box Contents
1. GA-Z170-D3H motherboard
2. Two SATA cables
3. Motherboard driver disk
4. I/O Shield
5. User’s Manual
6. One G Connector
Payment Offer: 2% Instant Discount on UPI and bank Transfer Payments.
Coupon Code: Use code KRGHOLI to get ₹100 off on orders above ₹1000.
Partial COD: Pay 30% Advance now and Balance on Delivery (COD).
Note: 2% UPI discount and partial payment are not applicable for software and ePass orders.
Term & Conditions
KRGKart Pay Later is currently available for order values up to Rs.15000 with Zero Processing Fee, No Documentation, and 3 No Cost EMIs.
*One-time payment gateway fee of 3.25% is applicable.
KRGKart Pay Later payment option will appear on the checkout page on order value up to Rs.15000.
Proceed with the KRGKart Pay Later payment option to check your eligibility. Enter your mobile number linked to your bank account and verify it with the OTP received from BharatX/AuroraX.
Eligible customers are required to pay the first EMI at the time of placing the order, and the remaining 2 EMIs in the next 2 months on the same date of order.
In case of order cancellation, amount paid by the customer will be refunded to the linked bank account within 5 to 7 working days.
Eligibility Criteria for KRGKart Pay Later
1. Link your Primary Account with a good transaction history for optimal credit eligibility. 2. The account holder must be 21 years or above. 3. An account link with a PAN Card is mandatory. 4. Please provide information related to the linked account owner on the KYC steps 5. Users should not have any pending EMIs, otherwise, in some cases, BharatX may not authorize the KRGKart payment later.
*KRGKart Pay Later is powered by BharatX/AuroraX Private Limited. To avail EMI/loan you have to agree to their terms and conditions.
