The Gigabyte Z790 Aorus Elite AX DDR4 ATX motherboard has an Intel Socket LGA 1700 and supports 13th and 12th gen series, processors. With twin 16*+1+2 phase digital VRM solutions, this gaming motherboard offers unmatched performance. It features dual-channel DDR4 memory (4xDIMMs) with XMP memory module support. It features Next Generation 4xPCIe 4.0 x4 M.2 connectors and advanced thermal design and M.2 Thermal Guard III to ensure VRM power stability and M.2 SSD performance.
M.2 connector with quick release and screwless design and 2.5GbE LAN and Wi-Fi 6E 802.11ax make this Gigabyte gaming motherboard more useful. With enhanced connectivity of HDMI, front USB-C 10Gb/s, and rear USB-C 20Gb/s, this Gigabyte motherboard is loved by all. It features Smart Fan 6 with multiple temperature sensors, a hybrid fan header with fan stop and BIOS updating without installing CPU, memory, and graphics card, and an 8+8 phase parallel power design.
 LGA1700 socket:
1. Support for the 13th and 12th Generation Intel Core, Pentium Gold, and Celeron Processors
2. L3 cache varies with CPU
 Chipset
 Intel Z790 Express Chipset
 Memory
 1. Support for DDR4 5333 (O.C.) / DDR4 5133 (O.C.) / DDR4 5000 (O.C.) / 4933 (O.C.) / 4800 (O.C.) / 4700 (O.C.) / 4600 (O.C.) / 4500 (O.C.) / 4400 (O.C.) / 4300 (O.C.) / 4266 (O.C.) / 4133 (O.C.) / 4000 (O.C.) / 3866 (O.C.) / 3800 (O.C.) / 3733 (O.C.) / 3666 (O.C.) / 3600 (O.C.) / 3466 (O.C.) / 3400 (O.C.) / 3333 (O.C.) / 3300 (O.C.) / 3200 / 3000 / 2933 / 2800 / 2666 / 2400 / 2133 MHz memory modules
2. 4 x DDR DIMM sockets supporting up to 128 GB (32 GB single DIMM capacity) of system memory
3. Dual channel memory architecture
4. Support for ECC Un-buffered DIMM 1Rx8/2Rx8 memory modules (operate in non-ECC mode)
5. Support for non-ECC unbuffered DIMM 1Rx8/2Rx8/1Rx16 memory modules
6. Support for Extreme Memory Profile (XMP) memory modules
 Onboard Graphics
 Integrated graphics processor-Intel HD graphics support:
1. 1 x HDMI port, supports maximum resolution 4096×2160@60 Hz
*Support for HDMI 2.0 version and HDCP 2.3.
(Graphics specifications may vary depending on CPU support.)
 Audio
 1. Realtek Audio CODEC
2. High-Definition Audio
3. 2/4/5.1/7.1-channel
(*You can change the functionality of an audio jack using audio software. To configure 7.1-channel audio, access the audio software for audio settings.)
4. Support for S/PDIF Out
 LAN
 Realtek 2.5GbE LAN chip (2.5 Gbps/1 Gbps/100 Mbps)
 Wireless Communication module
 Intel Wi-Fi 6E AX211
1. WIFI a, b, g, n, ac, ax, supporting 2.4/5/6 GHz carrier frequency bands
2. BLUETOOTH 5.3
3. Support for 11ax 160MHz wireless standard and up to 2.4 Gbps data rate
(*The actual data rate may vary depending on the environment and equipment.)
 Expansion Slots
 CPU:
1. 1 x PCI Express x16 slot, supporting PCIe 5.0 and running at x16 (PCIEX16)
(*For best performance, if installing only one PCI Express graphics card, be sure to install it in the PCIEX16 slot.)
Chipset:
1. 2 x PCI Express x16 slots, supporting PCIe 4.0 and running at x4 (PCIEX4_1, PCIEX4_2)
Support for AMD CrossFire technology (PCIEX16 and PCIEX4)
 Storage Interface
 CPU:
1. 1 x M.2 connector (Socket 3, M key, type 22110/2280 PCIe 4.0 x4/x2 SSD support) (M2A_CPU)
Chipset:
1. 2 x M.2 connectors (Socket 3, M key, type 22110/2280 PCIe 4.0 x4/x2 SSD support) (M2P_SB, M2Q_SB)
2. 1 x M.2 connector (Socket 3, M key, type 22110/2280 SATA and PCIe 4.0 x4 SSD support) (M2M_SB)
3. 4 x SATA 6Gb/s connectors
RAID 0, RAID 1, RAID 5, and RAID 10 support for NVMe SSD storage devices
RAID 0, RAID 1, RAID 5, and RAID 10 support for SATA storage devices
(*Refer to “2-8 Internal Connectors,” for the installation notices for the M.2 and SATA connectors.)
 USB
 Chipset:
1. 1 x USB Type-C port on the back panel, with USB 3.2 Gen 2×2 support
2. 1 x USB Type-C port with USB 3.2 Gen 2 support, available through the internal USB header
3. 2 x USB 3.2 Gen 2 Type-A ports (red) on the back panel
4. 5 x USB 3.2 Gen 1 ports (3 ports on the back panel, 2 ports available through the internal USB header)
Chipset+2 USB 2.0 Hubs:
1. 8 x USB 2.0/1.1 ports (4 ports on the back panel, 4 ports available through the internal USB headers)
 Internal I/O Connectors
 1. 1 x 24-pin ATX main power connector
2. 2 x 8-pin ATX 12V power connectors
3. 1 x CPU fan header
4. 1 x water cooling CPU fan header
5. 3 x system fan headers
6. 1 x system fan/water cooling pump header
7. 2 x addressable LED strip headers
8. 2 x RGB LED strip headers
9. 4 x M.2 Socket 3 connectors
10. 4 x SATA 6Gb/s connectors
11. 1 x front panel header
12. 1 x front panel audio header
13. 1 x USB Type-C header, with USB 3.2 Gen 2 support
14. 1 x USB 3.2 Gen 1 header
15. 2 x USB 2.0/1.1 headers
16. 2 x Thunderbolt add-in card connectors
17. 1 x Trusted Platform Module header (For the GC-TPM2.0 SPI/GC-TPM2.0 SPI 2.0 module only)
18. 1 x reset button
19. 1 x Q-Flash Plus button
20. 1 x Clear CMOS button
21. 1 x reset jumper
22. 1 x Clear CMOS jumper
 Back Panel Connectors
 1. 1 x USB Type-C port, with USB 3.2 Gen 2×2 support
2. 2 x USB 3.2 Gen 2 Type-A ports (red)
3. 3 x USB 3.2 Gen 1 ports
4. 4 x USB 2.0/1.1 ports
5. 2 x SMA antenna connectors (2T2R)
6. 1 x HDMI 2.0 port
7. 1 x RJ-45 port
8. 1 x optical S/PDIF Out connector
9. 2 x audio jacks
 I/O Controller
 iTE I/O Controller Chip
 H/W Monitoring
 1. Voltage detection
2. Temperature detection
3. Fan speed detection
4. Water cooling flow rate detection
5. Fan fail warning
6. Fan speed control
(*Whether the fan (pump) speed control function is supported will depend on the fan (pump) you install.)
 BIOS
 1. 1 x 256 Mbit flash
2. Use of licensed AMI UEFI BIOS
3. PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0
 Unique Features
 1. Support for GIGABYTE Control Center (GCC)
(*Available applications in GCC may vary by motherboard model. The supported functions of each application may vary depending on the specifications of the motherboard.)
2. Support for Q-Flash
3. Support for Q-Flash Plus
4. Support for Smart Backup
 Bundled Software
 1. Norton Internet Security (OEM version)
2. LAN bandwidth management software
 Operating System
 1. Support for Windows 11 64-bit
2. Support for Windows 10 64-bit
Payment Offer: 2% Instant Discount on UPI and bank Transfer Payments.
 Coupon Code: Use code KRGHOLI to get ₹100 off on orders above ₹1000.
Partial COD: Pay 30% Advance now and Balance on Delivery (COD).
Note: 2% UPI discount and partial payment are not applicable for software and ePass orders.
Term & Conditions
KRGKart Pay Later is currently available for order values up to Rs.15000 with Zero Processing Fee, No Documentation, and 3 No Cost EMIs.
*One-time payment gateway fee of 3.25% is applicable.
KRGKart Pay Later payment option will appear on the checkout page on order value up to Rs.15000.
Proceed with the KRGKart Pay Later payment option to check your eligibility. Enter your mobile number linked to your bank account and verify it with the OTP received from BharatX/AuroraX.
Eligible customers are required to pay the first EMI at the time of placing the order, and the remaining 2 EMIs in the next 2 months on the same date of order.
In case of order cancellation, amount paid by the customer will be refunded to the linked bank account within 5 to 7 working days.
Eligibility Criteria for KRGKart Pay Later
1. Link your Primary Account with a good transaction history for optimal credit eligibility. 2. The account holder must be 21 years or above. 3. An account link with a PAN Card is mandatory. 4. Please provide information related to the linked account owner on the KYC steps 5. Users should not have any pending EMIs, otherwise, in some cases, BharatX may not authorize the KRGKart payment later.
*KRGKart Pay Later is powered by BharatX/AuroraX Private Limited. To avail EMI/loan you have to agree to their terms and conditions.
